Electrical/Electronics/Energy   -   IEC 61215 :2005 ( PV Certification)

Eurotech does product certification  and installation validation for Crystalline/Thin Film and CPV Modules

Popular Product  Standard against which Eurotech Does Certification are 

IEC 61215 2nd Edition- This IEC standard specifies requirements  for   the design qualification and  type approval  of   terrestrial photovoltaic  modules suitable  for   long-term  operation  in  general open air climates.

IEC 61646:2008 This   International Standard   lays  down   requirements  for   the design qualification and  type  approval of   terrestrial ,  thin- film  photovoltaic  modules  suitable  for   long- term  operation  in general open-air  climates as  defined  in  IEC 60721-2-1.

IEC 61701:2011 This Standard describes test sequences useful  to determine the resistance of different PV modules to corrosion from salt mist  containing Cl-(NaCl,  MgCl2, etc.). All tests included in the sequences, except the bypass diode functionality test, are fully described in  IEC 61215,IEC 61646,IEC 62108, IEC 61730-2 and IEC 60068-2-52.

IEC 61730-1:2004 This  part of   IEC 61730 describes   the  fundamental construction  requi rements   for  photovol taic (PV)  modules   in or der   to provide safe electrical and mechanical operation during  their  expected lifetime. Specific topics are provided to assess the prevention of electrical shock, fire hazards, and personal injury due  to mechanical and environmental stresses . This  par t of  IEC 61730 pertains to the particular requirements of construction. IEC 61730-2 outlines the requirements of testing.

IEC 62108:2007 This International Standard specifies the minimum requirements for the design qualification and  type approval of  concentrator  photovoltaic  ( CPV)  modules  and assemblies  suitable  for  long-term operation in general open-air climates.

Product  Certification Process involves 

STEP 1: The Eurotech Engineer will draw the sample from Production for submission to a NABL Accredited Lab for testing against standard

STEP 2 : Submission of test Report from a NABL Accredited Lab + Bills of Material + Circuit Diagram+ Installation guidelines and other manual.

STEP 3: Review of Test report by Eurotech Engineer

STEP 4: Audit of manufacturing Site

STEP 5 : Review of Audit Report and issue of Certificate 

 

© All Rights Reserved to EUROTECH